Sensaphone CELL 682 - Cellular Alarm Dialer - Specifications

• Communications:
  • GSM Cellular TEchnology
  • 90+% Wireless Coverage
• Inputs:
  • 6 - Analog 4-20mA Inputs
  • 8 - Contact Closure Inputs
  • 2 - Relay Outputs
  • Run Time Accumulation
  • Temperature Measurement
• Alarm Delivery:
  • E-Mail – SMTP
  • E–mail Alarm Notification
  • Text Message Alarm Notification
  • Voice Phone Call Alarm Notification
  • 24 - Alarm Notification Destinations
• Other Features:
  • E-Mail – SMTP
  • Website Programming Access
  • 18VDC Power Requirement
  • Duplex Pump Control Logic
  • Peer to Peer Control Logic
  • NEMA4X Enclosure Rating
  • -30°C to 60°C (-22°F to 140°F) Operating Conditions

Sensaphone CELL 682 - Cellular Alarm Dialer - Included

• 1 x CELL682 Cellular Alarm Dialer

Sensaphone CELL 682 - Cellular Alarm Dialer

Need an alarm dialer in a location where you can't have a phone line? The Sensaphone CELL 682 is a cellular alarm dialer. With 6 analog and 8 dry contact inputs as well as 2 relay outputs it will cover all of your alarm and management needs. The alarm uses cellular technology to connect directly to the Sensaphone servers. The Cell682 is packaged for outdoor use in a Nema-4X housing, and even includes battery backup. A web site is provided for status, history, alarm response programming, and manual output control.

If an alarm condition is detected by the monitor it will trigger an alarm response from the Sensaphone servers. You can be alerted of the alarm by cell and pager text messages, email messages and/or custom voice phone calls.

Advanced Features:

• 6 Analog Inputs:
  
  • Can accept any 4-20mA analog transducer.
  • Input range can be custom scaled to measure in real engineering units.
  • Thermistors can be connected directly to accurately measure temperature.
• 8 Dry Contact Inputs:
  
  • Each channel can be normally open or normally closed.
  • Any input can be configured to accumulate run time.
• 2 Relay Outputs:
  
  • Manually controlled through web site.
  • Automatically switched when an alarm occurs.
  • Built in duplex pump control logic.
  • Alarms can automatically initiate an output response to a different location.
• Alarm Notification
  When an input channel detects an alarm, or out of range condition, there is an immediate communication from the Cell682 out to the redundant Sensaphone servers to process the alarm. The appropriate people are then contacted immediately by the Sensaphone servers using the following methods:
  
  • E-mail messages
  • Cell phone and pager text messages
  • Custom voice phone calls

Sensaphone CELL 682 - Cellular Alarm Dialer - Support and Downloads

• CELL682 Coverage Map (Make sure to click Data Coverage)
• CELL1Y Form
• CELL682 Manual
• CELL682 Flyer