Hose Wireless Driveway Alarm
The Hose Driveway Alarm uses an air hose to detect cars entering your driveway. This is similar to the type that you would see at service stations and gas stations, except ours is connected to a wireless transmitter with an amazing wireless range of 600'! The receiver has a built in chime, timed relay output and many other advanced features! The DKWRH3000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9 volt battery and comes with 25' of 3/8" diameter exterior air hose that will lay across the driveway (hose extensions available). When a vehicle drives over the hose a signal is sent to the Dakota Alert WR-3000 receiver up to 600' away*.
The transmitter box is weatherproof and may be mounted on a tree, post or wall. The system has unlimited expansion capabilities meaning you can add as many Dakota Alert Driveway Alarm components to your system as you like! With four chime tones to choose from you can program the transmitters so they will each sound a different tone at the receiver.
The WR-3000 is the receiver for the WRH-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from one of the transmitters, one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver comes equipped with 4 form "C" relays (one for each zone) and one 12 VDC output terminal that will activate for 10 minutes when a signal is received. The receiver can be user programmed so the 12VDC terminal and one relay will activate for 1 to 10 minutes if this is required. The musical tones will not be affected by this timer.
Wireless Driveway Alarms
Homesaver Alarm
