Sensaphone 400 will monitor your home or business for temperature extremes, water problems,
power failure and more...
The Sensaphone 400 is a new model that replaces the FGD1104, FGD1104 Cottage Sitter, FGD1114, FGD1104BS and the FGD1104 RC.
Did you know that power failures and high temperatures are the largest cause of data loss and system downtime in businesses worldwide?
According to a survey by the Yankee Group, almost half of the corporations researched put their downtime costs at upwards of $1,000 per hour. with nine percent estimating costs up to or more than $50,000 an hour!
Listen to an actual Sensaphone report by calling 610-558-4591
Absolute Automation offers Sensaphone alarms to protect your home.
FGD400 Features:
4 inputs for monitoring temperature(s), water alarms, motion sensors, door alarms, humidity etc.
Calls up to 4 phone numbers when a problem occurs.
Relay output for turning up the heat at your cabin. May also be used to activate a siren if used as a security system.
Security code access.
Temperature and Power monitoring to protect refrigerators, equipment, freezers etc.
Call your FGD400 using any telephone, to receive status reports and listen-in to on-site sounds.
Detects problems before they are disasters
Detailed Features
Recordable Voice:
The Sensaphone 400 and FGD800 includes the ability to customize the voice messages for each of the input alarms and the identification message. The messages are recorded by the user through the built-in microphone. This is certainly the most exciting and significant feature being added to the 400 and 800 products. Now that the two new desktop products have real voice programming, every Sensaphone product now supports recordable voice. Output:
The 400/800 include a relay output that can be programmed to operate automatically upon alarm, or manually from a remote touch tone phone. It can be used to trip a local alarm, or used like the Sensaphone CottageSitter to control a dual setback thermostat. Line Seizure:
Previously, the line seizure feature was not available in the 1104/1108. If the user desired this feature they had to pay extra and order the 1114 or 1118 version. Line seizure is now a standard feature on the new Sensaphone 400/800.
Phone Line Monitoring:There is a new phone circuit in the 400/800 that monitors the integrity of the phone line. If the phone line is cut or disconnected, an LED will flash and optionally the output relay can be tripped at the same time for a local indication of a problem. Batteries:
The 400/800 has a 24 hour battery backup capability just like the 1104/1108, but with slightly smaller C cells instead of D cells. Also, the batteries are changed from the front of the unit, so if it is wall mounted, you do not have to remove it from the wall to change the batteries. Phone Test:
Each dial out phone number can be tested from the keypad. When the test is being conducted, the speaker will play the sounds that are occurring on the real phone line. This makes is very easy to determine if the user needs to first dial a '9' or an '8' before the destination phone number, or other special dialing sequences. LEDs:
Additional status LED's are provided on the front of the 400/800 to show battery condition, alarm status, and phone status. Power:
The power adapter for the Sensaphone 400/800 is not hard wired like the 1104/1108. It uses a standard power plug so that it can be easily removed and fed through enclosure openings.