|
Sensaphone
Dialer model FGD400 Specs Page
power and temperature
alarm |
|
Sensaphone Model 400 Features and Specifications
( replacement for the 1104 and Cottage Sitter) |
Features of the Sensaphone 400 Dialer
-
4 inputs for monitoring temperature(s), water alarms, motion sensors, door alarms, humidity etc.
-
Calls up to 4 phone numbers when a problem occurs.
-
Relay output for turning up the heat at your cabin. May also be used to activate a siren if used as a security system.
-
security
code access.
-
Temperature and Power monitoring to protect refrigerators, equipment, freezers etc.
-
Call your FGD400 using any telephone, to receive status reports and listen-in to on-site sounds.
-
Detects
problems before they are disasters
|
|
|
|
|
| 4 INPUTS: |
|
Inputs automatically configure for :
Temperature sensors: -20°F to 150°F
Normally Open(NO) or Normally Closed (NC) contacts |
|
Automatic input configuration. |
|
|
Each input has programmable recognition time. |
|
Keypad entered internal calibration. |
|
 |
| VOICE MESSAGES: |
|
Spoken English vocabulary is built-in for programming and sensor read-outs. |
|
Custom messages are recordable in your own voice to describe each condition. |
|
Site identification may be recorded. |
|
| ALARM NOTIFICATION: |
|
WIll dial up to four phone numbers. |
|
Calls with recordable messages to quickly determine problem. |
|
Alarm test function to simulate and test the notification process. |
|
Line Seizure is included. |
|
|
| |
|
|
| |
|
| COMPATIBILITY: |
|
The Sensaphone 400 is a direct replacement for the model FGD1104 and Cottage Sitter. |
|
| POWER SUPPLY: |
|
Equipped with plug-in power supply. |
|
24 Hour battery backup using 6 size C alkaline batteries (not included). |
|
Automatically monitors for power failure alarms. |
|
International power options available. |
|
| OUTPUT RELAY: |
|
Normally Open and Normally Closed low voltage output relay included. |
|
Relay be controlled remotely or upon an alarm condition. |
|
| BUILT-IN COTTAGE SITTER CONTROL: |
|
The built in relay can be used to remotely change the temperature of a dual setback thermostat or switch between two standard thermostats. |
|
|
| Sensaphone Model 400 (new replacement for the 1104 and a direct replacement for the CottageSitter) |
| Size: |
71⁄2" W, 2" H, 81⁄2" D |
| Shipping Weight: |
4 lbs. |
| Batteries: |
(6) 1.5 Volt "C" cell alkaline (not included). |
| Telephone Connection: |
FCC approved RJ-11 plug-in modular connector with 6' cord. |
| Operating Temperature Range: |
Unit should be kept between 32° F and 120° F. |
| Temperature Sensing Range: |
-20º F to 150º F with remote temperature sensor. |
| NRTL listed for compliance with U.L. Standard 60950-1. |
Sensaphone
400 Specifications |
|
