The Sensaphone IMS1000 System provides complete monitoring for your computer facility or any building with a network.

Monitor environmental conditions such as Temperature, Humidity, Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the IMS1000 . When a sensor exceeds the threshold you are notified about the condition.

IP Monitoring
The IMS1000 monitors IP Devices through pinging and port availability.

Notification
When a problem occurs in your network, the IMS1000 will find you and notify you of the problem no matter where you are. Multiple communication interfaces— Ethernet port and standard telephone interface— guarantee that you get the message.

Status
You can always obtain status information about your infrastructure—anytime, anywhere. Call into the IMS1000 using your computer’s standard dial-up networking. If you’re not near a computer, then just pick up any phone and call into the IMS1000: It will tell you in a real voice report the status of all conditions.

model IMS 1000
Just $995.00 USD

• Download Product Manual
• Product Features
• Screen Shot of Device Summary
• Screen Shot of Device History

Easy to Install and Configure!

All of the sensors for the IMS-1000 use standard computer patch cables (Cat-5). Just snap in the connector and you're done. The sensors are automatically detected by the 1000 and even self configured. There are no screw terminals to deal with and no wire stripping to worry about. Just plug and go.

Once connected, the IMS-1000 will automatically recognize the type of sensor installed and configure it for you, using a standard template that you can modify. Because the IMS-1000 supplies power and configuration data for each sensor, the IMS-1000 can detect faults with your sensors: If there’s a cable disruption or your sensor is accidentally unplugged, you will know it.

Each IMS Host or Node attaches to your Ethernet network via the IMS Network Interface for monitoring of your network events.

The New IMS-1000 offers web-based monitoring for everyone

Sensaphone's latest development, the IMS-1000, provides a flexible, web-based monitoring system for many applications. It connects to any Ethernet network and has a built in web server for viewing status, making programming changes, and reviewing data log history. Up to eight sensors can be connected to monitor a wide variety of conditions including temperature, humidity, physical security, smoke, fire, power, etc. The IMS 1000 is perfect for cold storage applications and even accepts a new –85 Deg C temperatures sensor. It also includes one relay output to switch a local device on or off depending on alarm activity. Power failure monitoring is built-in along with a rechargeable battery backup.

Alarm notification is delivered by sending e-mail messages and text messages. An upgrade is available to also include a telephone connection that adds custom voice alarm phone calls. With the phone option users can also call in for a voice status just like most other Sensaphone products.

If the IMS-1000 is going to be used in a computer room, additional computer room features are also built-in. IP device monitoring is included to monitor the proper functioning of the servers on your network. Alarms can also be sent via snmp traps, and all programming parameters are accessible through the IMS-1000 snmp agent.

Easy Programming:
A simple fill in the blank web page is provided for all of your detailed programming of the 1000. It only takes a few minutes to type in the monitoring parameters and contact methods.

Easy Status View:
The single click web summary provides a quick summary of all your monitored conditions. Go to the web page and check the summary as often as you like to verify that everything is okay.

Easy History and Trend Information:
The IMS-1000 system stores important information for later viewing. This includes the details of alarm events and even periodic snapshots of all of the monitored conditions. This information can be viewed at anytime from the automatically generated web page. You can view single-click quick trends for each monitored condition, or even create a custom history view to see exactly what has been going on at your facility.

Conditions and Features
(click for drop down)