Water Bug model WB-200

Has a Form C relay output (it does not have it's own audible alarm) and requires a 12-24 DC supply. It is ideal for connecting to alarm panels, Sensaphone dialers, our property paging system, bells, strobes, buzzers etc. As many as 6 sensor probes can be run up to hundreds of feet away. Each sensor has surface contacts that detect the first appearance of water forming a film on the floor. The sensor will not alarm due to condensation or high humidity. The WB-200 includes one standard surface sensor with 12' of wire.

model WB200
$65 US$

Water Bug model WB-350

Has it's own 9 volt battery and chime. It is excellent as a stand-alone alarm to audibly alert you when it detects water. Both Water Bug models will notify you of leaks, water rising and drips before they become big floods.  As many as 6 sensor probes can be run up to hundreds of feet away. Each sensor has surface contacts that detect the first appearance of water forming a film on the floor. The sensor will not alarm due to condensation or high humidity. The WB-350 includes one standard surface sensor with 12' of wire.

model WB350
$65 US$

Water Bug model WB-800

The 8 Zone Water Bug model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. It will independently monitor eight zones and indicate with a light which sensor has detected water.This model also includes internal alarm chime with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensors (or 16 non-supervised sensors) can be run up to hundreds of feet away using any common telephone or low voltage wire. Four supervised standard surface sensors with 12' of wire are included with the unit.

model WB800
$215 US$

Water Bug WB1040 Additional Standard Surface Sensor may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Works with all models.

Comes with 12' of wire.

model WB1040
Just $24 US$

Water Bug WB0009 Additional Supervised Under-Carpet Sensor may be placed under carpet or raised flooring to detect the first appearance of leaking water.

Comes with 12' of wire.
Additional Supervised Under-Carpet Sensor for WB800 ONLY

model WB0009
Just $29 US$

Water Bug WB0006 Additional Supervised Standard Sensor may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising.

Comes with 12' of wire.
Additional Supervised Standard Sensor for WB800 ONLY

model WB0006
Just $24 US$

Power Supply 12 Volt for model WB200 and WB800

model Adapter500ma
Just $15 US$

Water Bug® is ideal for use with or around:

Residential or Vacation Homes

Basement Sump Pumps

Commercial Buildings

Office and Computer Areas

Unattended Buildings

Greenhouses & Animal Buildings

All Drain Areas

Sprinkler Systems