Dakota Alert Door and Driveway Alarm Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit Dakota Alert 2500 Doorbell and Pushbutton Bell Kit
Dakota Alert 2500 Driveway Alarm
SKU: DCMAUT2500

Dakota Alert 2500 Doorbell and Pushbutton Bell Kit

$164.97
Qty
  • Description

    Dakota Alert Doorbell and Driveway Bell Kit

    The Dakota Alert 2500 Doorbell and Driveway sensor kit allows homeowners to be notified when vehicles pull into their driveway as well as a door or gate location.  When the button is pressed or the motion sensor is triggered, a wireless signal is sent to the included wireless receiver.  The receiver in turn plays your selected tone.  The button and motion sensor can be set to a unique tone so you know which one is triggered without looking. Four different tones (Classical, Westminster Chime, Ding Done, Whistle) are available. Plus the triggered zone's LED indicator will also light up on the receiver.

    This included Dakota Alert DCR-2500 receiver can be located up to 2500 feet away*.  It comes with a plug-in power supply and has one 12VDC output and four Form “C” relay outputs that can be used to trigger external chimes, sirens, alarms and other systems.  Each relay is rated up to 24VDC at 3 Amps. The zone reminder lights, paired with an audible beep, can be programmed to activate every 15 minutes following the initial alarm ensuring your attention is captured!

    * Direct line of sight without interference.

    Dakota Alert Doorbell and Driveway Bell Kit - Specifications

    Chime Receiver Specifications

    • Four Different Chimes Tones
    • Volume Control
    • LED Reminder Lights
    • Operating Voltage - 12VDC - Power Supply Included
    • 12 volt DC output current: 400 mA maximum
    • Relay rating: 24VDC at 3 Amp
    • Frequency - 433.92 MHz

    Driveway Sensor Specifications

    • Power Source - 1 9V Battery (not included)
    • Battery Life - 6 to 12 months
    • Frequency - 433.92 MHz
    • Sensor Type - Passive Infra Red
    • Operating Temperature Range - (-)30° F to 110° F
    • Wireless Range - 2500 Feet (1/2 Mile)*
    • Low Battery Warning

    Wireless Doorbell Specifications

    • Can be activated using Push Button or terminal inputs (N/O or N/C)
    • Push Button glows Red when press
    • Frequency: 433.92 MHz
    • 256 Code Combinations
    • Battery required: 3 Volt Lithium (included)
    • Wireless Range: 2500'*
    • Weather Resistant (suitable for outdoor use)
    • Built in Magnetic Reed Switch (can also be used as door switch or mailbox alert)

    *Line of Sight

    Dakota Alert Doorbell and Driveway Bell Kit - Included

    • 1 - DCR-2500 Dakota Alert Wireless Receiver
    • 1 - 12V Power Supply for DCR-2500 Receiver
    • 1 - DCMT-2500 Dakota Alert Infrared Driveway Sensor
    • 1 - DCUT-2500 Wireless Doorbell

    Dakota Alert Doorbell and Driveway Bell Kit - Support and Downloads

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: DCMAUT2500