Mier Wired Drive Alert Kit

MIER DA-500 Driveway Alarm System

Have you ever been surprised or startled by an unexpected visitor at your door? With the Mier DA-500 Drive Alert you will always get an early warning of vehicles entering your driveway!

Perfect for use in residential driveways, on farms, commercial applications/drive thrus or perhaps in remote locations; the Drive-Alert is what you need to use for your protection! This multi-purpose, solid-state electronic alarm system is designed to detect vehicle traffic in any areas where the knowledge of movement is desired or necessary.

The Drive Alert works by sensing the motion of a metal object that passes within about eight (8) feet of the buried metal sensor probe. This sensor is buried approximately 6” deep, parallel to the driveway or area being protected. In the situation where a vehicle passes by the sensor an immediate signal is sent through this burial cable to the control panel, activating a small whistle to alert you! With a simple adjustment at the control box the sensitivity of the sensor’s operating range can easily be altered! Systems are available with varying cable lengths from 10’ to 1500’! Also included is a relay output to connect remote whistles or other accessories.

The DA-500 Drive Alert Driveway Alarm System is the security industry's most-often used method for detecting a vehicle when it enters a driveway. A variety of features and accessories make this unit ideal for both residential and commercial applications!

Common Driveway Alarm Applications

Protecting the home The Drive Alert allows homeowners to know when someone enters their driveway. The out-of-sight sensor detects moving objects in a nominal range of eight feet on either side of the sensor – and sends a signal to the master control unit, which sounds an electronic whistle.

Preventing theft The sensor, when placed alongside a stationary metal object (such as campers, farm tractors, RV's, boats, or gasoline tanks) will detect any movement of that object and sound an alarm, aiding the prevention of theft and vandalism.

Drive-Up Window Applications Restaurants, banks, pharmacies and other businesses that utilize drive-up windows can use the Drive-Alert unit to signal a customer’s arrival.

Enhancing safety Industrial safety is improved by using the Drive Alert unit at busy or blind intersections, helping to prevent accidents by signaling the movement of vehicular traffic in these areas. We also offer various accessories for the DA-500 Drive-Alert unit, which can enhance the effectiveness and versatility of the system. For more information on the DA-500 Drive-Alert, or our other quality products, just call us at 1-800-296-3910.

The Vehicle Detector Drive Alert – Used by the Security Industry The Metal Sensing Drive Alert Driveway Alarm – Model DA-500

MIER DA-500 Driveway Alarm - Specifications

• Input -- 120 VAC, 50-60Hz, 3.6 Watts
• Output -- 24 VDC at 100 Milliamps or: Dry Contact Relay - 24V/1AMP Maximum
• Surge protected from transients
• Adjustable sensor sensitivity
• Adjustable time control for electronic whistle
• Operating temperature -- 20 degree F to 160 degree F
• Weight -- six (6) pounds
• Operating Probe resistance - 900-1100 ohms

MIER DA-500 Driveway Alarm - Included in Kit

• Solid-state Master Control Panel
• Electronic whistle with “on-off” switch
• Red LED power-on indicator
• UL listed transformer and cord
• 100 feet of two-conductor shielded direct burial cable; other lengths available
• Weatherproof sensor
• SPDT relay output built in

MIER DA-500 Driveway Alarm - Downloads

• Chime Tone
• Driveway Alarm Manual