Water Bug® model WB200 ...Water Alarm with relay output
|
Water Bug® model WB-200
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensors up to hundreds of feet away, depending on the wire used. Each sensor has surface contacts that detect the first appearance of water forming a film on the floor. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit. |
model WB200
$65 US$
 |
Features:
- Versatile 12 or 24 Volt AC/DC power for operation
- No false alarms due to condensation or humidity
- Can monitor up to 6 sensor probes, hundreds of feet away
- Provides (1) form "C" contact closure output for alarm
- Easy surface mount installation
- One year parts and labor; subject to conditions of limited warranty
|
|
Typical Applications:
- Residential or Vacation Homes
- Basement Sump Pumps
- Commercial Buildings
- Office and Computer Areas
- Unattended Buildings
- Greenhouses & Animal Buildings
- All Drain Areas
- Sprinkler Systems
|
Accessory Options:
- Standard surface sensor - model WB1040
- Under carpet sensor - model WB1041
- Wall Transformer -model Adapter500ma
|
|
Water Bug®
Accessories
|
|
Water Bug WB1040 Additional Standard Surface Sensor
may be placed on the floor to detect the first appearance of leaking
water, or attached to your sump pipe to detect water rising. Works
with all models.
model WB1040
Just $24 US$
|
|
Water Bug
WB1041 Additional Under-Carpet Sensor may be placed under
carpet or raised flooring to detect the first appearance of leaking
water. Works with all models.
model WB1041
Just $29 US$
|
|
Need
wire to connect or extend your accessories?...click here |
| |
Water Bug®
is ideal for use with or around:
-
- Residential
or Vacation Homes
- Basement
Sump Pumps
- Commercial
Buildings
- Office
and Computer Areas
- Unattended
Buildings
- Greenhouses
& Animal Buildings
- All Drain
Areas
- Sprinkler
Systems
|
|
SPECIFICATION |
VALUE
FOR WB-200 |
Console
Size |
5"
x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm) |
Probe
Size (standard
P/N #1040) |
2"
x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm) |
Probe
Size (under
carpet P/N #1041) |
2"
x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm) |
Power
Requirements (resting state) |
12V
or 24V AC or DC |
Power
Requirements (alarm condition) |
5mA
@ 12V or 24V AC, or 13.5mA @ 12V or 24V DC |
Sensitivity |
Will
not alarm due to high humidity or condensation |
Operating
Temperature |
Control
and Probe 32° to +140° F (0° to +60° C) |
Outputs |
Form
C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct
high voltage switching) |
Recommended
Dist. Between Probes & Console |
1-2
probes: 200ft (61 m) max. • 3
or more probes: 500ft (30.5 m) per probe |
Recommended
Max. Probes Per Console |
6 |
|
