Water Leak Detection and Flood Prevention with Automatic Shut Off Valve
Unlike traditional spot sensors that miss hidden leaks, FloLogic uses advanced water flow sensing technology to continuously monitor your water flow, detecting everything from the smallest pinhole leaks to massive bursts. When it identifies abnormal water usage, it automatically shuts off the water supply using the built-in water valve.
How FloLogic Works:
Whole-Home Protection Starts at the Source
The FloLogic system monitors water flow at the main line, so it can spot unusual or continuous water flow anywhere in your plumbing without sensors, even when the leak is hidden. That whole-home view helps protect every fixture, appliance, and supply line downstream, including plumbing hidden behind walls, under floors, and in other hard-to-see areas.
Hybrid Mode with Sensors
Pinpoint water sensors are also available to add to the system to allow spot water detection immediately when water touches the sensor. This can be used in conjunction with flow based sensing for a hybrid approach to leak detection.
Home and Away Modes That Match Real Life
The FloLogic system is built to protect you without getting in the way of daily life. Home and Away modes let you set different continuous-flow limits based on whether the property is occupied, and you can fine-tune those settings to match how your normal use. This helps FloLogic leak detection react quickly when no one should be using water, while still allowing normal activity when you are home.
FloLogic Water Shut Off with an Automatic Valve
If abnormal flow is detected, FloLogic automatic shut off can activate right away. Water is stopped at the main line to help keep a small leak from turning into a major flood.
Frequently Asked Questions
Can the FloLogic system detect a tiny drip?
Yes. FloLogic leak detection is highly sensitive and can be adjusted down to 0.5 ounces per minute, which is about a drip per second. Away Mode does not change sensitivity, but it typically uses a tighter continuous-flow time allowance so the FloLogic system can react faster when the property is unoccupied.
What happens if my power goes out?
The FloLogic system has battery backup, so it can keep protecting your home during a power outage. It continues monitoring locally and can still shut off the water if it detects a leak.
Can I still water my lawn or fill a pool?
Absolutely. The FloLogic system is designed to accommodate longer water uses when configured properly. For high-volume tasks like filling a pool, you can temporarily override protection using the bypass option from the control panel or the app, then return to normal monitoring when the task is complete. You can also install the valve and sensor "down stream" from devices that use water constantly if needed.
Is the FloLogic valve compatible with PEX and copper piping?
Yes. The FloLogic valve can be installed on common residential plumbing materials, including copper, PEX, CPVC, and galvanized pipe when installed with the appropriate fittings. The FloLogic system is available in 1”, 1.5”, and 2” sizes to match your main water line diameter.
Does the FloLogic system qualify for insurance discounts?
Often, yes. Many homeowners' insurance providers offer credits or discounts for installing a flow-based automatic water shut-off device, but eligibility and savings vary by carrier and state. Ask your insurance compnay or agent to confirm.
For a limited time, take advantage of FloLogic discounts for CHUBB and State Farm insurance.
Protect your home with FloLogic from Absolute Automation USA and help stop leaks before they turn into costly damage.