Watercop SmartConnect WiFi and Mobile App Interface

WaterCop WCSC2 SmartConnect

Water leaks are one of the main causes of damage to homes that can often lead to costly repairs. Often times, even when a valve is shut off, water will have already spilt at it could be a few hours before you notice that a leak has occurred. By adding the SmartConnect to your WaterCop Classic or WaterCop PRO, you can receive notifications directly to your smartphone using the free app and cloud service.

The SmartConnect unit is powered by the WaterCop AUX I/0 port through a CAT5E or CAT6 cable. The SmartConnect can be connected to the WaterCop with up to 20' CAT5E or CAT6.

By checking the Device Log in the app, you can see if the valve closed due to a leak, through the app or by manual command at the WaterCop. You can also open and close your WaterCop valve through the app for complete control of your water supply. The app will also notify you if there’s a signal loss from the SmartConnect to the cloud service which may indicate a loss of power or a loss of Internet connection.
A separate notification is sent when connection is restored.

The SmartConnect unit is powered by the WaterCop AUX I/0 port through a CAT5 or CAT6 cable. It can be connected with up to 50' CAT5 or CAT6.

NOTE: For older WaterCop systems WCACT1, WPMS, WPMSH, WCNM and WCNM2
units or if more than 20' CAT5E/ CAT6 is required, you will need an external power
supply, ACA100 (sold separately).

WaterCop WCSC2 SmartConnect Specifications:

• Smart Phone or tablet with the following:
° Android Version 8.0 or higher/ iOS – 13.0 or higher
° SIM card or WiFi connectivity
• 2.4 GHz Router with Ethernet connection or a password-protected 2.4 GHz WiFi network
• Bluetooth 4.2 or above
• WCACT1, WPMS, WPMSH, WCNM and WCNM2 require additional power supply, ACA100 (sold separately)

WaterCop WCSC2  SmartConnect Includes:

• WaterCop SmartConnect device

• CAT5E cable

• Wall mount fasteners/anchors 

• Owner’s Manual